Interlogix NS2503-24P/2C User Manual - Manual (Page 168)

NS2503-24P/2C User Manual
168
show spanning-tree
Description:
Show spanning-tree information.
show spanning-tree port
Description:
Show spanning tree per port information.
Syntax:
show spanning-tree port [<port-list>]
Parameters:
<port-list> specifies the port to be shown. Null means all ports.
[no] spanning-tree debug
Description:
Enable or disable spanning tree debugging information.
spanning-tree protocol-version
Description:
Change spanning tree protocol version of CIST.
Syntax:
spanning-tree protocol-version
Parameters:
stp specifies the original spanning tree protocol (STP,802.1d).
mstp specifies the multiple spanning tree protocol (MSTP,802.1s)
spanning-tree max-hops
Description:
Set spanning tree bridge maximum hops of CIST and all MSTIs.
Syntax:
spanning-tree max-hops <1-40>
Parameters:
<1-40> specifies the bridge maximum hops. Default value is 20.
spanning-tree name
Description:
Set spanning tree bridge name of CIST.
Syntax:
spanning-tree name []
Parameters:
specifies the bridge name. Default name is null.
spanning-tree revision
Description:
Set spanning tree bridge revision of CIST.
Syntax:
spanning-tree revision <1-65535>
Parameters:
<1-65535> specifies the bridge revision. Default value is 0.
spanning-tree port path-cost
Description:
Set spanning tree port path cost of CIST.
Syntax:
spanning-tree port path-cost <1-200000000> [<port-list>]
Parameters: