Troubleshooting, Changing and registering remote codes, Keys to press – Brother 875 MC User Manual
Page 77: Press function, The display will show, Changing and registering remote codes -10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Sometimes
other
equipment
on
your
phone
line
reserves
a
key
that
is
in
the
Activation
or
Deactivation code. (Some ansvrering machines reserve the
key.) If the code you use to retrieve
messages
from
your
answering
machine
causes
the
line
to
be
disconnected,
try
changing
the
Remote Codes. Change *51 to ### and #51 to 999. The Remote Activation and Deactivation Codes
may not work with some telephone systems or telephone sets.
NOTE: If you accidentally pick up an extension phone when a fax message is being received, you
may disrupt the transmission or render some portions unreadable.
Changing and Registering Remote Codes
mm
KEYS TO PRESS
1
. Press
FUNCTION.
2. Press
7.
3. Press
5.
4. Press (left arrow) or (right
arrow) to choose ON or OFF.
Example: ON.
5. Press
SET.
6
.
Enter new remote code to activate.
(Factory
setting
is
‘‘*51”.)
Then
wait for
2
seconds.
7. Enter new remote code to deacti
vate. (Factory setting is “#51”.)
8
. Wait for
2
seconds.
9. Press
STOP
to exit.
THE DISPLAY WILL SHOW:
L
iMiBiiMgiiaiiiiM
BlllgjiiiiMiiiSlli
liitiipgiBiilfliWill
ggaaiiiaiiiiiiiiBiiii
I
7-10