Brother 875 MC - Manual (Page 116)

i i a i i i M i t b h i i i
illillliiiiiilllliiliiiiliililiilillilill
6 . Enter a fax forwarding number up
to 20 digits.
Example; 18005551234.
7. Press SET.
8 . Press STOP to exit.
[ W D # : 1 8 0 6 5 5 5 1 2 3 j
Memory Back-up of Message Center Memory
After you plug in the electrical cord, it will take a few days to charge the battery for
memory backup of the Message Center memory. It will keep memory for several
hours at full charge after a power interruption occurs.
iiiiiiiiiiiiii
Changing the Fax Forwarding Number Remotely
You can change the Fax Forwarding number remotely from any touch tone phone. See page 10-
24 for more information.
G) REMOTE RETRIEVAL
What Is Remote Control Access f ______________________________________
When you leave your home or office and turn on your Message Center to receive voice and/or fax
messages, you can call your machine from any touch tone phone or remote group 3 fax machine
and retrieve those messages. You can also program and control your Message Center with control
codes when you call. (See the Remote Control Commands on page 10-22 for more information
about the settings you can change remotely.)
Setting the Remote Access Code
Use the Remote Access Code from another location to retrieve voice and/or fax messages that are
stored in your Message Center’s memory. Changeyour Remote Access Code and use it as a “secret
password” if you wish to safeguard your messages.
The factory default setting for the Remote Access Code is “159*”, You can change the first three
digits of the Remote Access Code, but the last digit (an asterisk) can not be changed. The first three
digits must not be the same as your Remote Activation or Remote Deactivation Codes. (Example:
If your Remote Access Code is 160*, do not use 160,60* ,01*, 02* or 03* for either the Activation
or Deactivation Code.) When you use the Remote Access Code, you must press all four keys (three-
digit number plus*).
10-20