Brother 875 MC - Manual (Page 45)

UNIT AS A TELEPHONE
5. USING THE UNIT AS A TELEPHONE »MM»
Your fax machine can be used to make regular telephone calls. You can dial numbers manually,
by pressing the number keys, or by using One-Touch or Speed-Dialing.
Manual Dialing
1. Pick up the handset, or press HOOK.
2. When you hear a dial tone, you can begin dialing by pressing the number keys.
3. If you used HOOK to dial, pick up the handset when the call is answered.
One-Touch Dialing
1. Pick up the handset, or press HOOK.
2. When you hear a dial tone, press the desired One-Touch key.
3. If you used HOOK, pick up the handset when the call is answered.
If you try to use a One-Touch number that has not been stored on the key you pressed, you will
hear a warning sound and the display will say,“NOT REGISTERED”. The display will return to
normal after 2 seconds.
Speed Dialing
1. Pick up the handset or press HOOK.
2. When you hear a dial tone, press SPEED DIAL and then press the two-digit Speed-Dial
number.
3. If you used HOOK, pick up the handset when the call is answered.
Using HOLD, PAUSE, # with the Telephone
- Use REDIAL / PAUSE for putting a 3,5 second pause between numbers.
- Use HOLD to put a call on hold. You can put down the handset without
disconnecting the call. You must pick up the fax handset to release the call from
HOLD.
- Use # temporarily to switch the dialing type from “pulse” to “tone”. This key is also
used for push-button services, such as those offered by banks, credit card companies,
or paging services.
On Hook Dialing
When you make a call using HOOK, you can listen to the other end through the one­
way speaker of the machine, but they can’t hear you unless you pick up the handset.
Also, if you press HOOK again before you pick up the handset, the call will be
disconnected.
Optional Settings When You Send a Fax Manually
Resolution (See page 6-2, 6-13.)
Cover Page (See page 6-14.)
Call Reservation (See page 6-18.)
• Contrast (See page 6-3.)
• Overseas Mode (See page 6-12.)
5-1