Keys to press, Press function, Display will show – Brother 875 MC User Manual
Page 103: Isielil
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
isielil
I
The 3 Basic Steps to Turn the Message Center Mode On
_________________
You can get started receiving messages by doing the following three steps.
1.
Setting the Message Storage.
2.
Recording the Outgoing Message (MSG CTR OGM).
3. Activating the Message Center Mode.
Setting the Message Storage
__________________________________________
Setting the Message Storage is the first step in turning on the Message Center Mode,
Before you set the Message Storage, make .sure you carefully read the “Mode Settings at a Glance”
(See page 10-2). If you are using the Voice-on-Demand option, it is a good idea to set TAD mode
ON. Then, if a caller does not enter a command during the Message Center Pro OGM, the caller’s
message will still be stored in the flexible memory for TAD messages. Once you decide upon the
mode that best suits your needs, follow the steps below.
The following example is FAX: ON, TAD; ON.
KEYS TO PRESS
1. Press
FUNCTION.
2. Press 8.
3. Press 1.
4. Press ^ (left arrow) or (right
arrow) repeatedly to select ON or
OFF.
Example: FAX: ON.
5. Press
SET.
6. Press (left arrow) or (right
arrow) repeatedly to select ON/OFF/
EXT.
Example; TAD; ON.
7. Press
SET.
8. Press
STOP
to exit.
= DISPLAY WILL SHOW:
IC8
Г
|Я
ш
10-7