Ecm (error correction mode), Error re-transmission, Press function – Brother 875 MC User Manual
Page 66: The display will show, Ecm (error correction mode) -20, Error re-transmission -20, Iwilii iiilliiillliliiliiimi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ECM (Error Correction Mode)
The
Error
Correction
Mode
(ECM)
is
a
way
for
the
machine
to
check
the
integrity
of
a
fax
transmission
while
it
is
in
progress.
ECM
transmissions
are
possible
only
between
machines
that
both have the ECM feature. If they do, you can send and receive fax messages that are continually
checked for their integrity.
Sufficient memory must be available in your machine for this feature to work.
Error Re-Transmission
Error
Re-Transmission
is
helpful
when
the
receiving
machine
does
not
have
ECM.
Even
though
your machine cannot check the integrity of the message, it will resend the page(s) affected after
occurrences of accidental noise have caused an error.
1. Press
FUNCTION.
2. Press 5.
3. Press
4.
4.
Press (left arrow) or (right
arrow) to choose either ON or OFF.
Example; ON.
5. Press SET.
6. Press STOP to exit.
THE DISPLAY WILL SHOW:
iiiiilitiliitiliiiil
1
. T E M P
iWilii
iiilliiillliliiliiiMi
E R R O R R E :
liiiij
I
:)
iiiiiiiliiiliiiiiili
- This feature is available only for memory transmission using Quick-Scan (see page
6-6-9).
6-20