Setup & preparation before, For your information – Brother 875 MC User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETUP & PREPARATION BEFORE

FOR YOUR INFORMATION

You can plug a triplex adapter into an R J14 wall outlet. It will separate the wires into

two separate RJll jacks (line 1, line 2) and a third RJ14 jack (lines 1 and 2). Plug the

fax machine into L2 of the triplex adapter.

R J 1 4

L I

L 2 L 1 + L 2

] CTTl

R J l l R J l l R J 1 4

T r i p l e x A d a p t e r

Installing a Fax Machine^ Two Line TAD and Two Line Telephone

When you are installing a two line telephone answering device (TAD) and a two line

telephone, your fax machine must be isolated on one line at both the wall jack and

at the TAD. The most common connection is to put the fax machine online 2. The back

of the two line TAD must have two telephone jacks; one labeled LI or LI and L2 and

the other labeled L2. You will need at least three telephone line cords: the one that

came with your fax machine and two for your two line TAD. You will need a fourth

line cord if you add a two line telephone.

Place the two line TAD and two line telephone beside your fax machine. Plug one end

of the telephone line cord for your fax machine into the L2 jack of the triplex adapter;

plug the other end into the LINE jack in the back of the fax machine. Plug one end

of the first telephone line cord for your TAD into the LI jack of the triplex adapter;

plug the other end into the LI or LI and L2 jack in the back of the two line TAD. Plug

one end of the second telephone line cord for your TAD into the L2 jack in the back

of the two line TAD; plug the other end into the EXT jack in the back of the fax

machine. The two line TAD hookup is complete. It will answer both lines as usual.

You can keep two line telephones on other wall outlets as always. There are two ways

to add a two line telephone to the fax machine’s wall outlet. Plug the telephone line

cord from the two line telephone into the L1+L2 jack of the triplex adapter. If you

prefer, you can plug it into the TELE jack in the back of the two line TAD instead.

C w o L i n e T A D

F a x M a c h i n e

1-8

This manual is related to the following products: