Brother 875 MC - Manual (Page 147)

12. PRINTING REPORTS AND LISTS
You can print the following lists and reports under function item 3. PRINT REPORTS.
Level one
function
1 Level two
I function
Content Page
PACT. REPORT
The Activity Report lets you know if
transmissions and incoming faxes were
received.
12-3
2. ALL DIAL
This is a list of the names and numbers
that are stored in One-Touch and Speed-
Dial memory, printed in One-Touch and
Speed-Dial number order.
12-4
3. TEL. INDEX
This report is same as the All Dial list
printed in alphabetical order.
4. COVERPAGE
This report allows you to check the
Cover Page format.
6-14
3. PRINT REPORTS
5. CALL BACK MSG
This report is used to check the Call
Back message format.
6-19
6. USER OPTIONS
The settings for FUNCTION 5 to 9
(USER OPTIONS, TEL OPTIONS,
SETUP SYSTEM, SETUP MSG CTR
and SETUP MC PRO) are printed here.
7. XMIT REPORT
You can choose whether the
Transmission Verification Report will
be printed after all faxes you send.
ON/OFF
12-5
8. MEMORY STATUS
The addressee and the amount of
occupied memory for items stored in
the memory are printed here.
12-6
9. CALLER ID
You can review calls you received by
checking this list.
7-20
Other Reports
The following reports are printed automatically, for your information.
Help List (By pressing HELP on the control panel.) (See page 3-7-8.)
Polled Report
Delayed Sending Report
Broadcast Report
Sequential Polling Report
Transmission Verification Report
Helpful Hints • If you need an ACS check sheet, press (left arrow) and ► (right arrow)
simultaneously.
• If you press (left arrow) and (right arrow) simultaneously again, an
ACS check sheet will not be printed.