Brother 875 MC - Manual (Page 76)

Ill
iiiilii
Using the Activation Code:
When you are at the fax machine, you will probably answer incoming calls before your fax
machine or answering machine is programmed to pick up. If you answer a call and no one
seems to be on the line, assume it is a fax message. Do not hang up. You must activate your
fax machine to take over the call first. (If you are holding the fax handset, just press START and
hang up.) If you are on an extension or external phone, press >1<51 and wait for your fax
machine to respond before you hang up. After 3 seconds you will hear receiving tones (chirps)
through the handset. Then hang up. You can repeat the code as many times as needed. Your fax
machine will take over the call and print the fax message. If your caller wants to talk before
sending the fax, you can have a conversation first and then activate your fax machine with the
code.
The Remote Activation Code can also be used by your callers. When you are using a TAD, your
outgoing message (OGM) should end with the statement “to send a fax, press ^51”. (See the
section on Connecting a Telephone Answering Device for more information.)
Using the Deactivation Code:
When your fax machine is in F/T mode, sometimes it will answer a call that is not fax calling tones
(a telephone call or manual fax). It will respond with a double ring (short, short) to alert you to
take over. Because it has already answered the call, only the fax machine will ring; extension
phones are no longer connected to the call. Pick up any phone except external phone on the line.
To take over the call at the fax machine:
Pick up the handset of the fax machine and talk to the caller as usual. If no one is there or someone
is trying to send you a meuiual fax, press the START key and replace the handset. Your fax
machine will display “receiving” and print the incoming fax message.
To take over the call at an extension phone:
Pick up the handset on another telephone and press #51 quickly during the silence between
the double ring pattern. When the fax machine hears the code it will stop ringing and let you
speak with the caller. If no one is on the line or someone is trying to send you a manual fax, send
the call back to the fax machine (H<51).
Making the Remote Codes Easier to Use ___________________________
You can change the codes at any time. It may be easier for you and your callers to press the same
key three times (Example: *>l<* and ###). Although you can change the codes to any numbers you
want, try to avoid using digits for the Activation Code. The Remote Activation Code can not match
any number you dial. If you try to dial a phone number that includes the Activation Code, your
fax machine will go into receiving mode.
7-9