Brother 875 MC - Manual (Page 51)

2. Enter a fax number.
Example; One-Touch dialing.
3. Press START.
i NJ O F F !
[ O I A L I N i
i S E N D I N i
W «1
Sending a Fax Manually
1. Insert the documents face down
into the feeder.
2. Pick up the handset or press HOOK
and listen for the dial tone.
3. Enter the fax number.
You can use manual dialing, One-Touch
dialing, Speed Dialing, or Tel-Index.
4. When you hear a fax tone, press
START.
Your fax machine will begin sending the
documents.
5. Return the handset to its cradle, if
you did not use HOOK.
C
c
THE DISPLAY WILL SHOW:
[ COPY i; PilESS: COFin
:)
3
SgjjiMliittBiiia
Automatic and Manual Re-dialing
If a number you have dialed is busy or your call did not go through for some other reason, you can
re-dial that number. There are two ways to re-dial, “automatic” and “manual.” Automatic
redialing can only be used for faxes that were sent using automatic transmission—not for
telephone calls. The factory setting is “auto re-dial on” and it will re-dial the number 3 times at
5 minute intervals automatically before giving up. The fax machine will also re-dial the last dialed
number when you press REDIAL/PAUSE {manual re-dialing).
6-5