Brother 875 MC - Manual (Page 31)

Level one
function
8. SETUP
MSG CTR
9. SETUP MC
PRO
Level two
function
Explanation of Options
Factory
setting
Page
4. REMOTE
ACCESS
You can register a REMOTE ACCESS ID (3
digits) allowing you to operate the machine
remotely. (Example ; Retrieving an incom­
ing fax message)
159>K 10-20-21
5. ICM MAX. TIME
This is the maximum length for your voice
information in Voice-on-Demand, the ICMs
in Personal Mailbox and Message Center,
Memos and Voice Alarm recordings.
20/25/30/35/40/45/50/55/60 seconds
30 10-15
1 6. OGM
The machine has two types of OGM (Outgo­
ing Messages) for MSG CTR and FAX/TEL
switch. After selecting the message type,
you can play, record or erase.
MSG
CTR
OGM
7-4,
10-13-14
7. PRINT FAX
You can print incoming faxes that were
stored in MSG CTR memory.
10-11
8. RECORDING
MODE
To get more recording time for incoming
messages, memos, and voice messages,
change the sound quality setting from HIGH
to NORMAL.
NORMAL 10-15-16
9. TOLL SAVER
If you set TOLL SAVER to ON, you can
check if a message was received by the ring
delay. Tall saver overrides the Ring Delay
setting. ON/OFF
OFF 10-14-15
1.MSG CTR PRO
You can turn the Message Center Pro Mode
on or off with this switch. ON/OFF
OFF 11-18
2. OGM
You can record Level 1 and 2 OGMs for
callers, telling them what to do in each step.
MSG CTR PRO/MAIL BOX/FAX ON DE-
MAND/VOICE ON DEMAND
MSG
CTR
PRO
01
11-13-16
11-12-13
3. MAIL BOX
There are 5 personal mail boxes. For each
mail box, the owner can record his/her own
OGM for callers. 01/02/03/04/05
4. FAX INFO
You can store the fax information for each
Fax on Demand memory box. You have up to
99 memory boxes. 01-99 (The number of
available boxes depends upon the amount of
information you store.)
11-7-9
5. VOICE INFO
You can store the voice information for each
Voice on Demand memory box. You have up
to 99 memory boxes. 01-99 (The number of
available boxes depends upon the length of
your messages.)
— 11-10-11
3-6