Change log – AERCO Innovation (G-14-2265 and above) User Manual

Page 206

Innovation Water Heaters Installation, Operation & Maintenance Manual

Page 206 of

206

AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913

OMM-0078_0L

PRI: 11/25/2014

Phone: 800-526-0288

GF-128

International Inc.

Change Log

Date

Description

Changed By

08/05/2014

Rev K PIRs:
754: Addendum 1, replaced 161450 with 63147 in ALL gas train BOMs
708: Removed Combustion Chamber Liner, 161151
934-21: Changed name of Chapter 5 to SAFETY DEVICE TESTING
934-41: Clarified instructions on opening sequencing valve, section 9.9.2
934-50: Added new CAUTION to section 2.9 regarding acceptable
condensate drain material
1018: Replaced Dynamic Load Anticipator 22151 with 22225 in Appendix F.
934-575: Added new note to section 2.9 regarding use of condensate
Neutralizer Kit; modified combustion calibration per Tech Service Bulletin
TSB-2014-01.
934-57: Modified values in steps 10, 13 & 17 in section 4.4 - Natural Gas
Combustion Calibration.
934-80: Clarification to sections 2.3, 2.8, 2.9 & 2.10.2 to related to the
pressure relief and manual shutoff valves.
1034: Updated graphic & instructions in section 2-10, updated tables 3-2, 3-
3 and 3-4, added/removed WHM menu options to Appendix A, added new
options to Chapter 9 - Water Heater Management

Chris Blair

11/25/2014

Rev L PIRs:
979: Updated gas train 22168-1
1018: This PIR not implemented, returned 22151 in place of 22225 in
Appendix F.
1074: Ignitor-injector replaced direct spark, replaced gas train part drawings
in Appendix F. Added drawings for gas trains 22182-1 & 22182-4.
1075: Replaced flame rod 66018 with 66037 (Kit P/N 24356-2)
1086: Added new section 6.7.1, anode replacement.
934-105: Remove last line paragraph from warranty (coverage outside the
US/Canada limited to 18 months).
934-99: Added new section 6.11 - LWCO Cap Test Instructions.
934-113: Updated Control Panel menu descriptions & added section 3.7 -
Calibration Menu to Chapter 3, updated Appendix A, removed default
values, removed Appendix D, (all defaults now in Chapter 3).
1092: Removed Chapter 8 – RS232 Communication, per Firmware version
4.0 and above.
1118: Removed vent gasket 81148, expanded section 2-13 Flue Gas Vent
Installation; use Red RTV when installing flue vent

Chris Blair