KEYENCE FS-N10 Series - Manual (Page 68)

4-3 Detection Settings (Func)
4
Set
tings
f
o
r
Ad
v
an
ced F
u
nct
ion
s
4-22
- Digital Fiber Sensor FS-N10 Series User's Manual -
The analog output can be automatically scaled so that the 5 V is output in respect to
the received light intensity "
100.0 ". This function is used simultaneously with the
various preset function. This function is useful when frequently using the preset
function as the analog output can be constantly sequenced with the "
.0 to 100.0 "
display, etc.
* Not available for the FS-N10 Series shipped before March 10, 2011.
1
When received light intensity is dis-
played, press and hold the [MODE] but-
ton, [SET] and
button
simultaneously for 3 seconds or more.
ProG YES or ProG no is displayed.
2
Press the [MODE] button once.
3
Using the button, select Pr-A Std
to not change the analog upper limit
value when the preset function is exe-
cuted, and select
Pr-A PrSt to change
the analog upper limit value sequen-
tially when the preset function is exe-
cuted. Then, hold down the [MODE] button.
When " Std " (default) is set, the analog output upper limit will not change
even if the various preset function is used.
Analog scaling mode (FS-N11MN only)
Reference