KEYENCE FS-N10 Series - Manual (Page 28)

3-3 Adjusting Sensitivity
3
Ba
sic
Oper
ati
on
3-6
- Digital Fiber Sensor FS-N10 Series User's Manual -
Enabling the preset function
When the PST indicator is not lit, press the [PRESET] button.
The PST indicator lights
in green. The current
value is set to "
100.0 "
and the setting value is
set to "
50.0 ".
Disabling the preset function
When the PST indicator is lit, press and hold the [PRESET] button.
• The PST indicator turns off, indicating that the preset function has been dis-
abled.
• Once the preset function is disabled, the setting value is recalculated while
retaining the ratio of the setting value and received light intensity.
Preset Function
Green PST lights up
Setting value
is
" 50.0
Current value is
"
100.0 "
Workpiece