Display/control unit, Display/control unit -4 – KEYENCE FS-N10 Series User Manual
Page 12
1-2 Part Names
1
Bef
o
re
U
s
in
g
1-4
- Digital Fiber Sensor FS-N10 Series User's Manual -
1-output type (FS-N11
/N12
/N11C
/N12C
/N11EN/N12EN/N11MN/N10)
*Not provided on the Zero Line type (FS-N10).
Display/control unit
Item
Description
-1
Operation indicator
(1-output/Zero line type)
Indicates the current output (detection) status.
-2
Operation indicator
(2-output type)
Indicates the current output (detection) status of channels 1 and 2
separately.
[SET] button
Use when setting sensitivity, etc.
"Adjusting Sensitivity" (page 3-5)
Set value display
(green display)
Displays a setting value or advanced setting item in this area of 7-
segment green indicators.
Current value display
(red display)
Displays the current value (received light intensity) and selection
items for detailed settings with red 7-segment display.
Manual button
Used to adjust the setting value or select an option.
-1
Power select switch
(1-output type)
*
Changing power modes.
SEL:
Allows you to set a power mode using the "Changing Power
Modes" function of basic setup.
M:
Fixes the power mode to the "MEGA mode".
"Locking in MEGA Mode" (page 3-22)
-2
Channel toggle switch
(2-output type)
*
Toggles between channels 1 and 2 for configuring the received light
intensity display or sensitivity setting.
[PRESET] button
Used for presetting or setting values or parameters.
[MODE] button
Used for toggling L-on/D-on, proceeding to advanced settings, or
confirming selections.
DTM indicator
Lights when a DATUM mode is in effect.
PST indicator
Lights when preset value is set.
-1
-2
-1
-2
1
2