Cisco 12000/10700 V3.1.1 - Manual (Page 427)

14-37
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Address Family Configuration
Figure 14-24 BGP Address Family—Neighbor Configuration Window
Step 4 Choose the chassis from the Chassis list and the address family from the Address Family List, for which
you want to configure the Neighbor.
Step 5 Edit the fields displayed in the window, as required.
BGP Address Family-Neighbor Configuration—Detailed Description
The Configure Neighbor window displays a list of Address Families and an area: Add/Remove Neighbor.
Address Family List—Displays a list of the address families.
Add/Remove Neighbor
Address Family—Unique identifier of the address family type.
VRF Name—Identifier of the VRF Name if the address family type is IPv4 VRF
Neighbor IP Address—This is used to configure the IP address of the neighbor router for the address
family.
Remote AS—This is used to configure the neighbor router’s autonomous system number. This value can
range from1 to 65535.
Note This attribute is configurable only for the ipv4 unicast and ipv4 vrf address families.