Checkline FH Series - Manual (Page 49)

© ElektroPhysik MiniTest 7200 FH / MiniTest 7400 FH 49
13. Care and Maintenance
13.1 Care
Use a soft damp cloth with water or a mild detergent to clean the gauge and accessories.
Caution:
Do not use solvents because they might damage the plastic parts. Do not use metal brushes or
other tools for cleaning the sensor tip.
13.1.1 Using NiMH storage batteries
To achieve optimal service life of the NiMH storage batteries, please respect the following
instructions.
•
Make sure to use the full battery capacity before your recharge it. Frequent short discharge
and recharge cycles prematurely reduce their service life.
• The storage batteries should always be fully recharged. Avoid premature interrupt of reload
process, otherwise batteries may not be recharged to their full capacity any more.
•
Try to save battery life e. g. by operating the MiniTest 7200 FH / 7400 FH in Auto Switch
off mode, instead of continuous service.
13.2 Maintenance
Generally, no maintenance work is required for MiniTest 7200 FH / 7400 FH.
Please note: Repairs may only be carried out by authorized ElektroPhysik staff.