Checkline FH Series - Manual (Page 36)

© ElektroPhysik MiniTest 7200 FH / MiniTest 7400 FH 36
8.2.3 Delete all Readings
From Main Menu chose “Statistics“. Use arrow keys to move to
“Delete all readings“. Press OK to confirm.
From Measure Menu press function key “Statistics” followed by
function key “Help/Extras”. Use arrow keys to move to “Delete all
readings“. Press OK to confirm.
To abort, press ESC.
The delete action will delete all readings of the active batch. Batch
name, sensor configuration and calibration for this batch will remain
in memory.
8.3 Numerical Statistics
From Main Menu chose “Statistics“. Use arrow keys to move to “Numerical Statistics”. Press OK to
confirm.
From Measure Menu press function key “Statistics”.
Number of readings
Average ( x )
Standard deviation (s)
Minimum
Maximum
Variation coefficient
Process capability indices Cp and Cpk (if spec. limits have been set).
For more detailed information on statistics please refer to section
15.3.