Checkline FH Series User Manual

Page 11

•

Used or defective batteries or storage batteries may contain hazardous substances and

must be disposed according to the legal provisions of your country.

3.1.4.2 Power supply unit

For mains operation, the power supply unit must be used. If operated via the power supply unit,

batteries should be inserted to supply the internal time clock, otherwise, after approx. 1 minute, the

settings of the real-time clock will go lost as soon as supply from the mains is cut.

The power supply unit comes with two different adapter plug versions (Euro and US plug). If the

power supply unit comes with an adapter plug connected that does not match your socket, simply

change the adapter plug accordingly.

Simply remove the adapter from the power supply unit and fix the other one as required.

Note:

The adapter has not been designed for frequent change.

3.2 Sensors FH 4 and FH 10

3.2.1 General Remarks

In this new SIDSP (Sensor integrated digital signal processing) procedure, all necessary

measuring signals are created and completely processed in the sensor itself. Only the completely

processed digital readings are transferred to the base unit for display, statistical evaluation and

data storage. Unlike the commonly used analog procedures, the new SIDSP procedure excludes

any error influences on the measuring data during transfer over the probe cable. The result is a

measuring accuracy and constancy of readings that has been unmatched so far. The complete

sensor technique is integrated into a robust stainless-steel housing.

3.2.2 Sensor Models

Two sensor models are available:

FH 4 sensor to cover the 0 …4 mm range

FH 10 sensor to cover the 0…10 mm range.

Both sensors feature a wear-resistant sensor tip most suitable also for hard materials such as

glass, for instance.