Brookfield DV-III Ultra Rheometer - Manual (Page 73)

Brookfield Engineering Laboratories, Inc. Page 73 Manual No. M98-211-E0912
Strain This field displays the Apparent Strain placed on the sample for each data
point. The Apparent Strain is the angular distance that the spindle rotates
in the sample. See Appendix D2 - Spindle Codes and Speeds for Yield
Tests - for the equation used to calculate strain.
The following are displayed in the line immediately below the Data/Results table:
1. The number of the highlighted record
2. The total number of data records
3. The date and time that the highlighted record was taken.
The test results are displayed below that line.
Test Result There are five (5) possible test results:
1. Test Passed
2. Test Failed due to an Under-Range condition
3. Test Failed due to an Over-Range condition
4. Test Failed due to a User-Limit violation
5. Test Failed due to a user cancellation
See Section IV.8.6.3 - Test Results - for more information regarding these possible results.
Temperature The temperature recorded at the conclusion of the test is displayed here
in °C.
% Torque @ Yield The %Torque value at the yield point is displayed here.
Yield Stress The stress at the yield point is displayed here in Pascals (Pa).
Clicking the e
xpOrt
button displays the Print Preview window. From the Print Preview window, the
S
ave
r
epOrt
button can be clicked to allow you to save the report to various other file formats.
Note: The Save Report dialog box allows reports to be saved to in QuickReport
(*.QRP), Comma Separated Text (*.CSV), HTML (*.HTM), and Excel
spreadsheet (*.XLS) formats.
See Section IV.8.6.2 - Printing a Program - for more information regarding this window.
All open, save, and print operations selected while this page is displayed will open, save, and print
data, but NOT test parameters.