Brookfield DV-III Ultra Rheometer - Manual (Page 107)

Brookfield Engineering Laboratories, Inc. Page 107 Manual No. M/98-211-B0104
Brookfield Engineering Laboratories, Inc. Page 107 Manual No. M98-211-E0912
APPENDIX D1 - Spindle and Model Codes for Viscosity Tests
Each spindle has a two digit code which is entered using the SPDL key on the DV-III Ultra key pad.
The entry code allows the DV-III Ultra to calculate Viscosity, Shear Rate and Shear Stress values.
Each spindle has two constants which are used in these calculations. The Spindle Multiplier Constant
(SMC) used for viscosity calculations, and the Shear Rate Constant (SRC), used for shear rate and shear
stress calculations. Note that where SRC = 0, no shear rate/shear stress calculations are done and the
data displayed is zero (0) for these functions.
Table D-1
SPINDLE ENTRY CODE SMC SRC
RV1 01 1 0
RV2 02 4 0
RV3 03 10 0
RV4 04 20 0
RV5 05 40 0
RV6 06 100 0
RV7 07 400 0
HA1 01 1 0
HA2 02 4 0
HA3 03 10 0
HA4 04 20 0
HA5 05 40 0
HA6 06 100 0
HA7 07 400 0
HB1 01 1 0
HB2 02 4 0
HB3 03 10 0
HB4 04 20 0
HB5 05 40 0
HB6 06 100 0
HB7 07 400 0
LV1 61 6.4 0
LV2 62 32 0
LV3 63 128 0
LV4* 64 640 0
LV5 65 1280 0
T-A 91 20 0
T-B 92 40 0
T-C 93 100 0