Brookfield DV-III Ultra Rheometer - Manual (Page 123)

Brookfield Engineering Laboratories, Inc. Page 123 Manual No. M/98-211-B0104
Brookfield Engineering Laboratories, Inc. Page 123 Manual No. M98-211-E0912
APPENDIX H - DVE-50A Probe Clip
Probe Clip DVE-50 is supplied with all model DV-III Ultra Rheometers. It is used to attach the RTD
temperature probe to a low form Griffin beaker. Figure H-1 is a view of the Probe Clip, showing the
hole into which the RTD probe is inserted. When inserting the RTD probe into the Probe Clip, the upper
part of the Clip is compressed by squeezing the points shown in Figure H-1.
RTD Probe
Hole
Squeeze Here when
installing RTD
Temperature Probe
Figure H-1
Figure H-2 shows the probe clip mounted in a 600 ml low form Griffin beaker.
Note: The RTD probe must be parallel to the beaker wall so as not to interfere
with the yeild measurement.
600ml
500
ml
40
0
30
0
20
0
10
0
USA
No.
14000
600 ml Low Form
Griffin Beaker
DVE–50
Probe Clip
RTD Temperature Probe
Figure H-2