Brookfield DV-III Ultra Rheometer User Manual
Page 48
Brookfield Engineering Laboratories, Inc.
Page 48
Manual No. M/98-211-B0104
Brookfield Engineering Laboratories, Inc.
Page 48
Manual No. M98-211-E0912
S
B.E.V.I.S. PROGRAMS MENU
B.E.V.I.S. operations are accessed by pressing the “2” key when in the PROGRAM MODES
menu. The user is immediately presented with:
B.E.V.I.S. PROGRAMS
PROGRAM #3 IS IN USE
1 = SELECT/DOWNLOAD
2 = RUN
Figure IV-32
This screen informs the user that the B.E.V.I.S. program in storage slot 3 is current (“last used”)
and that it may be run by pressing the “2” key or another program may be selected by pressing
the “2” key. It should be noted that entrance to the B.E.V.I.S. program mode makes the last used
program available for printing or running. Thus the user, seeing that a program was resident in slot
3, could have printed it directly from the above screen by pressing the front panel
key.
S
SELECTING AND DOWNLOADING B.E.V.I.S. PROGRAMS
To select a program the user presses the “1” key and is presented with:
SELECT A PROGRAM
AVAILABLE: 56789
IN MEMORY: 01234
CURRENT: 3
Figure IV-33
The user is informed that the current (or “last used”) program is no. 3; that programs 0, 1, 2, 3 and
4 are available for immediate use and that five (5) slots: 5, 6, 7, 8 and 9 are empty and are available
for download from a host computer. A press of the
ENTER
key would select the current program (i.e.
“3”) for use while a press of an appropriate numeric key 0,1,2,3 and 4 would select that specific
program slot for use. The above screen would be updated to reflect the new selection. A press of
the 5, 6, 7, 8 or 9 keys will place the user in the B.E.V.I.S. program download mode. The following
screen appears (assuming a press of the “5” key):
DOWNLOAD A PROGRAM
LOAD PGM TO SLOT #5
PRESS ENTER TO START
Figure IV-34
The user’s selection “5” is flashing and is the current slot selection. When ready, the user presses
the
ENTER
key to begin the program download. The following screen will appear for the duration
of the download. See Section VI. RHEOLOADER for information on creating and downloading
B.E.V.I.S. programs.
DOWNLOAD A PROGRAM
DOWNLOADING BEVIS
PROGRAM TO SLOT #2
Figure IV-35