Welch Allyn Acuity LT Mobile - Installation Guide - Manual (Page 61)

Installation Guide Appendix B Wireless Acuity LT Central Monitoring System 57
• If you press YES, the monitor turns off and then turns on and seeks to connect to
the Acuity LT System with the new network name.
• If you press NO, the monitor displays the Change Net Name screen again.
WARNING When setting the patient monitor network name, make sure that it
matches the network name labeled on the CPU for your wireless Acuity LT
System. If a different network name is set, the monitor could connect to a
different nearby wireless Acuity System. This would result in confusion about
patient monitoring and the location of patient data.
WARNING Make sure that the network name of any Propaq CS monitor with
hardwired and wireless capability does not match the network name of any
nearby wireless Acuity System. When a Propaq CS monitor is unplugged from a
hardwired Acuity System, it attempts to make a wireless connection with any
nearby wireless Acuity System.