Network alert message – Welch Allyn 206EL Propaq Encore Vital Signs Monitor - User Manual User Manual
Page 92

88
Acuity Central Monitoring system
Welch Allyn Propaq Encore Vital Signs Monitor
Network alert message
When the Propaq Encore is connected to the Acuity system, it constantly exchanges
information with Acuity. If the Propaq Encore detects an interruption in this flow of
information, it displays an alert message: NETWORK FAULT, CHECK ACUITY/DATA
COMM CONNECTION.
If the Propaq Encore displays this message, check the Acuity network cable to be sure it
is plugged in to the side panel and to the bedside jack. If the cable is damaged, replace
the cable.
If the cable appears undamaged and the Acuity system is operating normally, ask your
service personnel to check the network and the Propaq Encore Acuity connector.
This manual is related to the following products: