Printing the apnea ticket, Printing when a patient alarm occurs – Welch Allyn 206EL Propaq Encore Vital Signs Monitor - User Manual User Manual
Page 85

Reference Guide
Printing
81
Printing the apnea ticket
The Apnea Ticket documents the length of each apnea episode.
To set the Propaq to print an Apnea Ticket after an apnea event, follow these steps.
1.
From the main menu, press the following buttons: SETUP, MORE, PRINTER.
2.
Press the NEXT button until APNEA TICKET is highlighted in the Printer Setup
window.
3.
Press the CHANGE button until APNEA TICKET is set to ON.
Printing when a patient alarm occurs
To set up the printer to print on a patient alarm, follow these steps.
1.
From the Main Menu, press the following buttons: SETUP, MORE, PRINTER.
2.
Press the NEXT button to select ALARM PRINT in the printer setup window.
3.
Press the CHANGE button until ALARM PRINT is set to ON.
. . . and/or 60 seconds after the last breath
was detected if the patient has not resumed
breathing
The Apnea Ticket is printed after the patient
resumes breathing . . .
SETUP PAGE
mmHg
NEXT
PREV MENU
PR TREND MORE
CHANGE
MCO
2
BR
SpO
2
PA
PRINTER
CONTINUOUS : 25.0 mm/s
AUTO PRINT : 15 minutes
ALARM PRINT :
OFF
NIBP TICKET : OFF
APNEA TICKET : OFF
OXYCRG ON ALARM: OFF
35/ 18
( 85)
35 12
92