Welch Allyn 206EL Propaq Encore Vital Signs Monitor - User Manual - Manual (Page 11)

2
7
Getting started
Introducing the Propaq Encore
Intended use
Before using the Propaq Encore on a patient, be sure you understand the Safety
Summary at the front of this book. It provides important information about safely using
the Propaq Encore. The Propaq Encore monitor is intended to be used by skilled clinicians
for multiparameter vital signs monitoring of neonatal, pediatric, and adult patients in
health care facility bedside applications; as well as for intra- and interfacility transport.
Propaq Encore monitors that do not include CO
2
or printer options are able to withstand
light rain exposure over short periods of time (uniform distribution of approximately 1 mm
of water/ minute for 10 minutes or less).
Propaq Encore models and options
Three models of Propaq Encore monitors are available.
Features common to all models ECG, 3-lead or 5-lead configurations, 0.05-40/0.5-40 Hz
NIBP, with neonatal, pediatric and adult modes
Temperature, 2 channels: YSI 400 and 700 series-compatible connectors
Defibrillator Synchronization
Real-time Analog output of ECG
Electrocautery noise suppression on all channels except Impedance
Pneumography
206EL Two Invasive Pressure Channels
204EL One Invasive Pressure Channel
202EL No Invasive Pressure
Options available for each model Pulse Oximetry (SpO
2
)
Capnography (CO
2
) (available only with SpO
2
):
Mainstream Capnography (MCO
2
)
Sidestream Capnography (SCO
2
)
Dualstream Capnography (Both MCO
2
and SCO
2
)
Impedance Pneumography (RESP) (available only with SpO
2
)
Printer
HP-compatible side panel