EFCO S5500 SSG Captured - Manual (Page 39)

EFCO CORPORATION 6/2012 PART NO. Y556 Page 39 of 81
S-5500 SSG and Captured Corner Mullion Installation Instructions
Section VI: Glazing Preparation (SSG)
Apply two beads of sealant in the
reglets of the corner mullion where
the corner mullion glazing adapter
mates into the corner mullion.
Seal between the mitered
ends of the heads and the
corner mullion. Fill all voids
completely, and tool smooth.
Note: The corner mullion glazing adapter
must be set immediately after this step
before the sealant begins to cure.
SSG HEAD
CORNER
MULLIONS
HEAD AT SSG CORNER
SSG CORNER
MULLION GLAZING
ADAPTER