EFCO S5500 SSG Captured - Manual (Page 37)

EFCO CORPORATION 6/2012 PART NO. Y556 Page 37 of 81
S-5500 SSG and Captured Corner Mullion Installation Instructions
Section VI: Glazing Preparation (SSG)
STEP #2 SET AND ATTACH CORNER MULLION GLAZING ADAPTER
A. Apply sealant to the bottom end of the corner mullion glazing adapter.
B. Insert the end of the corner mullion glazing adapter as shown in the detail below.
C. Fill all voids completely, and tool the sealant smooth on the bottom end of the corner
mullion glazing adapter.
D. Attach the glazing adapter to the corner mullion with the required fasteners.
E. Cap seal the fastener heads at all fastener penetrations.
SILL AT SSG CORNER
Fill all voids completely,
and tool smooth.
Apply sealant to the
bottom end of the
corner mullion
glazing adapter.
Insert the end of the
adapter behind the
notches in the sills.
CORNER
MULLIONS
SSG SILL
SSG CORNER
MULLION GLAZING
ADAPTER