Dell 3115cn Color Laser Printer - Manual (Page 614)

This option is available only for color printing and when entry data is RGB data.
-RGBPr= mode
Specifies RGB input profile.
This option is available only for color printing and when entry data is RGB data.
-RGBTp= mode
Specifies RGB color temperature.
This option is available only for color printing and when entry data is RGB data.
-Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta-high:yellow-
low;yellow-middle:yellow high:black-low:black-middle:black-high
Specifies adjustment value for color balance of each color/density.
-Cb Option value must be specified in the following order:
Cyan low density, Cyan medium density, Cyan high density, Magenta low density, Magenta medium
density, Magenta high density, Yellow low density, Yellow medium density, Yellow high density, Black
low density, Black medium density, Black high density
If no value is specified, it is treated as "0"(Normal).
File
/usr/local/dellbin3115/.dellpsdefault3115
This is the default command option setting.
Important
The dellpsif filter ignores the pw and pl entries of /etc/printcap. Thus, the pw and pl entries cannot
be used to change the option of each paper size.
If the same option is specified for PostScript files which already have added options, such as paper
selection, it will be ignored.
Use the -ps option only when a PostScript file that contains no %! at the beginning of the file is
processed as the PostScript file. If a normal text file is input, it will not function correctly.
Precautions and Limitations
During Installation
Pay attention to the following points during the installation.