Dell 3115cn Color Laser Printer - Manual (Page 268)

NOTE: Disabling the operator panel menus does not prevent access to the Stored Print and Tray
Settings menus.
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >Secure Settings appears, and then press . 3.
Panel Lock is displayed. Press . 4.
Press until Enable appears, and then press . 5.
Press Back to return to the previous menu. 6.
Press until >Change Password appears, and then press . 7.
Reenter the password to confirm the password that you entered, and then press .
The password has been changed.
8.
NOTE: If you forget your password, turn off the multifunction printer. Then, while holding Menu, turn
on the multifunction printer. Continue to hold Menu until the display indicates Ready to Init. This
will recover the factory default panel password.
Note that the password for Panel Lock, COPY/SCAN/FAX Lock, and Secure Lock is disabled. Also note
that the settings for AddressBook and FAX are cleared.
NOTE: If panel lock is Enable, the factory-default panel password is 0000.
See also:
" Panel Lock/Change Password "
Disabling Panel Lock
NOTE: Before disabling Panel Lock, ensure that Copy/Scan/Fax Lock and Secure Receive is
disabled.
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >Secure Settings appears, and then press . 3.
Panel Lock is displayed. Press . 4.
Panel Lock Set is displayed. Press . 5.
6.