Dell 3115cn Color Laser Printer User Manual

Page 400

Print is too light.

· The print cartridges may be low or need to be replaced. Confirm the amount of

toner in each print cartridge and replace it with a new one if necessary.

· Set the Toner Saving Mode check box to off in the Advanced tab in the

printer driver.

· If you are printing on an uneven print surface, change the Paper Type settings

in the Tray Settings menu. See "

System Settings

· Verify that the correct print media is being used.

Toner smears or print
comes off page.

· If you are printing on an uneven print surface, change the Paper Type settings

in the Tray Settings menu. See "

System Settings

· Verify that the print media is within the printer specifications.
· The fuser unit is old or damaged. Replace the fuser unit. See "

Replacing the

Fuser Unit

Toner spots appear on
the page/printing is
blurred.

· Check the print cartridges to ensure that they are installed correctly.
· Change the print cartridges. See "

Replacing Print Cartridges

Entire page is white.