Dell 3115cn Color Laser Printer - Manual (Page 61)

FTP Password Sets whether to enable or disable the password. And also
specifies the password value up to 7 characters.
Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
IP Filter
(IPv4) *
2
Address Sets the address in the address field. Enter a numeric value
between 0 and 255 in each field of "aaa.bbb.ccc.ddd."
However, 127 and 224-254 cannot be used to "aaa."
Address Mask Sets the Subnet Mask in the Mask field. Enter a numeric value
between 0 and 255 in each field.
Active
Mode Reject Rejects printing from specified network address.
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
* 1 An optional multi-protocol card is required to display the item.
* 2 This item is only available for LPD or Port9100.
NetWare
Purpose:
To configure detailed settings for IPX/SPX and NetWare.
Values:
IPX/SPX
Settings Frame
Type Auto Specifies the active frame type automatically.
Ethernet II Selects Ethernet II frame type.
Ethernet
802.3 Selects IEEE802.3 frame type.
Ethernet
802.2 Selects IEEE802.2 frame type.
Ethernet
SNAP Selects SNAP (Sub Network Access Protocol) frame type.
Current Frame Type Displays the current frame type.
Network Address Displays the IPX network address.
NetWare Device Name *1 Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object
Name). The original setting remains valid if no input is made.
Active
Mode Directory:
PServer
Mode Selects this option when using in Directory: PServer Mode .