Dell 3115cn Color Laser Printer - Manual (Page 249)

Enable* Enables Power Saver Mode2.
Disable Disables Power Saver Mode2.
Power Saver Timer
Purpose:
To specify the amount of time the multifunction printer waits after a job is submitted before it goes into the
power saver mode.
Values:
Mode1 5-60
min
Specifies the amount of time before the multifunction printer enters power saver mode
after it finishes a job.
5 min*
Mode2 1-6 min
6 min*
Enter 5 to put the multifunction printer in power saver mode five minutes after it finishes a job. This uses
much less energy, but requires more warm-up time for the multifunction printer. Enter 5 if your
multifunction printer shares an electrical circuit with room lighting and you notice lights flickering.
Select a high value if your multifunction printer is in constant use. Under most circumstances, this keeps the
multifunction printer ready to operate with minimum warm-up time. Select a value between 5 and 60
minutes for power save mode if you want a balance between energy consumption and a shorter warm-up
period.
The multifunction printer automatically returns to the standby mode from the power saver mode when it
receives data from the computer or remote fax machine. You can also return the multifunction printer to the
standby mode by pressing any button on the operator panel.
Auto Reset
Purpose:
To automatically reset the settings for COPY, SCAN, or FAX to the default and return to the standby mode
after you do not specify any settings for the specified time.