Dell 3115cn Color Laser Printer - Manual (Page 343)

While a fax is sending in color, Color appears on the fourth line of the LCD panel.
While a fax is sending in black and white, Black & White appears on the fourth line of the LCD panel.
Check on the activity report:
You can check the Mode field on the activity report.
If the fax was sent in color, "Color" is output on the report.
If the fax was sent in black and white, G3, SG3 or ECM is output on the report.
If a fax sent as color is changed to black and white, *G3, *SG3, or *ECM is output on the report.
Check on the monitor report:
You can check in the mode field on the monitor report if a monitor report is set to be output by Fax Transmit
(Setup
Admin menu System Settings ).
Not Print Does not print the report.
Print at Error* Prints the report when a communication error is detected.
Print Always Always prints the report for the fax transmission.
If the fax was sent in color, "Color" is output on the report.
If the fax was sent in black and white, G3, SG3 or ECM is output on the report.
If a fax sent as color is changed to black and white because the receiver could not accept a color fax,
*G3, *SG3, or *ECM is output on the report.
Automatic Dialing
Speed Dialing
You can store up to 200 frequently dialed numbers in speed dial locations (001-200).
When the speed dial job specified in the delayed fax or redial exists and you change the speed dial number
from the operator panel or Dell Printer Configuration Web Tool, the destination of the fax may be changed.
Storing a Number for Speed Dialing
Press until >FAX appears, and then press . 1.
Press until >Add PhoneBook Entry appears, and then press . 2.
3.