Dell 3115cn Color Laser Printer - Manual (Page 403)

of alignment. operator panel by using the chart. See " Color Reg Adjust " for more details.
Colored dots are printed
at regular intervals. · Replace the print cartridge that prints the dots with a new one.
Partial blanks, creased
paper or blotted printing. · Condensation inside the multifunction printer causes partial blanks or creased
paper. Keep the multifunction printer turned on and leave it more than one
hour to get rid of the condensation. In winter, keep the multifunction printer
turned on to prevent condensation from forming. In this case, you can reduce
power consumption by using the energy-saving mode. If the problems still
occur, contact Dell. See "
Contacting Dell " in the Owner's Manual or in this
manual.
· This occurs when you print on talc paper or acid paper. Use neutralized paper.