Dell 3115cn Color Laser Printer - Manual (Page 347)

NOTE: Before operation, ensure Panel Lock is enabled.
To turn the secure receiving mode on:
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >Secure Settings appears, and then press . 3.
Press until >Secure Receive appears, and then press . 4.
Press until >Secure Receive Set appears, and then press . 5.
Press to select Enable , and then press . 6.
Press to select Change Password , and then press . 7.
Enter a four-digit passcode you want to use, using the number keypad and press . 8.
NOTE: When you set Secure Receive Set to Enable , 0000 is set by default.
To return to the standby mode, press Cancel .
When a fax is received in the secure receiving mode, your multifunction printer stores it into memory
and the JOB STATUS screen displays "Secure Receive " to let you know that there is a fax stored. 9.
To print received documents:
Press until >JOB STATUS appears, and then press . 1.
Press until >Secure Receive appears, and then press . 2.
Enter the password, and then press .
The faxes stored in memory are printed.
3.
To turn the secure receiving mode off:
Access the Secure Receive menu by following steps 1 to 5 in "To turn the secure receiving mode
on:". 1.
Press to select Disable , and then press . 2.
To return to the standby mode, press Cancel . 3.
Printing Reports