Dell Brocade Adapters - Manual (Page 41)

Brocade Adapters Installation and Reference Manual 13
53-1002144-01
Host bus adapters
1
Using Brocade HBAs, you can connect your host system to devices on the Fibre Channel SAN. The
combined high performance and proven reliability of a single-ASIC design makes these HBAs ideal
for connecting hosts to SAN fabrics based on Brocade Fabric or M-Enterprise operating systems.
NOTE
This publication only supports the HBA models listed in Table 5 , and does not provide information
about the Brocade 410 and 420 Fibre Channel HBAs, also known as the Brocade 400 Fibre Channel
HBAs.
Stand-up models
Figure 6 on page 13 illustrates major components of the Brocade 825 stand-up model HBA. Please
note that the following illustration is representative and may have minor physical differences from
the HBA that you purchased.
FIGURE 6 825 HBA with low-profile mounting bracket (head sink removed)
1 LEDs for port 1 SFP
2 Fiber optic cable connectors for port 1 and port 0 SFPs
3 LEDs for port 0 SFP
4 Low-profile mounting bracket. Note: The HBA ships with the low-profile mounting bracket installed.
5 PCIe x8 PCIe connector
6 ASIC
7 Serial number label
8 Label showing PWWN for each port.