Dell Brocade Adapters - Manual (Page 168)

140 Brocade Adapters Installation and Reference Manual
53-1002144-01
Boot over SAN
4
8. Use the Up and Down arrow keys to select a boot device, then use one of the following options
to configure boot device settings:
• Press C to clear a selected boot device from the list.
• Press M to manually edit boot device information, then enter the PWWN and LUN values
for the boot device. Press M to exit.
• Select a device and press Enter. This displays additional screens that allow you to select
discovered LUNs as boot devices.
If you select a device under Boot Device Settings and press Enter, a screen similar to the
following displays listing all discovered boot targets.
9. Select a target on which you want to designate a boot LUN and press Enter.
A screen similar to the following displays listing device information and LUNs visible to the
adapter.