Dell Brocade Adapters - Manual (Page 252)

224 Brocade Adapters Installation and Reference Manual
53-1002144-01
Network driver parameters
A
Enabling jumbo frames for Solaris
For Solaris 10, you can enable support for jumbo packet frames and set the MTU size for these
frames up to 9000. Use the following steps:
1. Add the following line to the bna.conf file. This file is located in /kernel/drv/bna.conf.
bfa_port-mtu=
where:
x BNA (Brocade Network Adapter) driver instance number
mtu_value 1500 to 9000
NOTE
Size must not be greater than size set on the FCoE switch.
2. Reload the driver.
3. Enter the following command:
ifconfig bna mtu