Linux, Vmware – Dell Brocade Adapters User Manual

Page 144

Text mode
Original mode

116

Brocade Adapters Installation and Reference Manual

53-1002144-01

Setting IP address and subnet mask on CNAs

Linux

Following is an example for using the ifconfig command to set the IP address and subnet mask.
Note that a CNA and a Fabric Adapter with ports configured in CNA or NIC mode are typically named
“eth0.”

ifconfig eth0 193.164.1.10 netmask 255.255.255.0 up

VMware

Please refer to ESX/ESXi Configuration Guide on network configuration for VMware ESX/ESXi 4.x
and 5.0.