Mouse problems, Step 4 – Dell PRECISION 530 User Manual
Page 152
152
Solving Problems
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
4
Turn off the computer and the device, swap the device's cable with a
known working cable, and then turn on the computer and the device.
Is the device working properly?
Yes. You need a new device cable.
for technical
.
5
Turn off the computer and the device, swap the device with a
comparable working device, and then turn on the computer and the
device.
Is the device working properly?
Yes. You need a new device.
for technical assistance.
No.
for technical assistance.
Mouse Problems
Basic Checks:
•
Check the
to see if the specific problem is identified.
•
Disconnect the cable from the computer and check the cable
connector for bent or broken pins. Check for damaged or frayed cables.
•
Ensure that the cable is firmly connected to the computer.
•
If you are using a
mouse, ensure that you connect to one of the
Port 1 USB connectors on the computer back panel (see "
").
•
Reinstall the mouse driver for your operating system.
•
Restart the computer.
If the problem still exists after you complete the basic checks, fill out the
as you perform the following steps:
1
Turn off the computer, wait 10 to 20 seconds, and disconnect the
mouse. Connect the mouse back to the computer, and then turn it on.
Is the device working properly?
Yes. The problem is resolved.
No. Go to
.