Removing the microprocessor – Dell PRECISION 530 User Manual
Page 123
Removing and Installing Parts
123
Re m o v i n g t h e M i c r o p r o c e s s o r
4
Install the new microprocessor in the socket:
a
Ensure that the lever on the microprocessor socket is fully
extended to the release position.
NOTICE:
When you place the microprocessor in the socket, ensure that the
microprocessor aligns properly with the socket. To avoid damage, you must
position the microprocessor correctly in the socket.
b
Align pin 1 of the new microprocessor with pin 1 of the socket.
NOTE:
Pin 1 of the microprocessor is indicated by a small triangle in one
corner of the microprocessor. Pin 1 of the socket is indicated by a small
triangle in one corner of the socket. See "
NOTICE:
The microprocessor pins are delicate. To avoid damage, ensure that
the microprocessor aligns properly with the socket, and do not use excessive
force when installing the processor.
c
Carefully set the microprocessor in the socket and press it down
lightly to seat it.
microprocessor
microprocessor socket
socket lever