Dell PRECISION 530 User Manual

Page 13

Safety Information

In addition, take note of these safety guidelines when appropriate:

•

When you disconnect a cable, pull on its connector or on its strain-

relief loop, not on the cable itself. Some cables have a connector with

locking tabs; if you are disconnecting this type of cable, press in on the

locking tabs before disconnecting the cable. As you pull connectors

apart, keep them evenly aligned to avoid bending any connector pins.

Also, before you connect a cable, make sure both connectors are

correctly oriented and aligned.

•

Handle components and cards with care. Do not touch the

components or contacts on a card. Hold a card by its edges or by its

metal mounting bracket. Hold a component such as a microprocessor

chip by its edges, not by its pins.

Also see "

." Dell recommends

that you periodically review the safety instructions in your System
Information Guide.