Dynalco AF-900PC Air/Fuel Ratio Controller User Manual
Page 41
40
8=1
9=2000
11=9
12=0
77=33.5
86=0
105=0
106=3500
107=0
110=30
111=350
112=30
S ; Store parameter to non-volatile memory
A configuration file (AF900PC.spc) is provided with the DynaHost program. Use
this file to edit or when you want to go back to the factory defaults.
A report is presented (Fig. 19) when downloading the configuration file. A
successful response to a command sent is represented with an ampersand ‘@’.
Download Report
Figure 19
11.2 Uploading Configuration to an .spc file
It is recommended that a configuration file (.spc) with the current configuration of
your system be saved once the controller has been optimized for the installation.
This will provide a download file for other controllers used on similar engine types.
To upload a file, click the Upload button on the control panel of any DynaHost
screen. You will be presented with two dialog boxes; the first one is going to ask for
the ‘Source File’, which could be the AF900PC.spc file provided from factory. The
second dialog box is going to ask for the ‘Target File’ where you are going to save