Dynalco AF-900PC Air/Fuel Ratio Controller User Manual
Page 30
29
Log: Click the Log button “ON” to force a data log to internal flash memory when
the fault occurs.
Value: This column displays the current value of all trips that have a numeric value.
The value displayed is after the appropriate filters have been applied.
Threshold: This column displays the trip threshold value for all trips that have a
numeric value. To change a threshold value, click into the parameter and edit it.
Delay: This column indicates the delay time in seconds or minutes between the
fault occurring and the trip being actuated. All delay times may be edited and have
a range of 0 to 240.
Status: Indicates whether each trip is in the “Fault “ or “No Fault” condition.
TRIP SCREEN 2
This screen (Fig. 13) is used to setup the trip action for post-catalyst and catalytic
converter system faults.
Trip Screen 2
Figure 13