Dynalco AF-900PC Air/Fuel Ratio Controller User Manual

Page 13

Text mode
Original mode

9. Front Panel Display User Interface

The AF900PC requires the user to configure a variety of parameters. By
performing one of three procedures below, parameters may be configured.

1) Using interface via the SETUP key (password required), keypad, and a 4x20

display.

NOTE: A limited number of parameters are available in the setup screens
of the AF900PC. Using a laptop to configure the AF900PC is
recommended.

2) Using DynaHost multiple laptop configuration screens via a laptop or PC.

3) Using DynaHost, a text editor (Windows Wordpad) and editing the

downloaded file (AF900PC.SPC) via a laptop or PC.

9.1 Front Panel Configuration Screens

The AF900PC Front Panel Display (FPD) user-interface consists of a 4-row by 20-
column LCD display (LCD); a 13-key custom keypad; and two LEDs to indicate
ALARM and SHUTDOWN.