ADS Environmental Services Model 3600 530002 A2 - Manual (Page 65)

4-32 ADS 3600 Flow Monitor O&M Manual
You will need the following parts when assembling a surcharge mount:
l an aluminum surcharge mount,
l four 6-32
×
1 in. (25 mm) round-head machine screws,
l eight 6-32 washers, and
l four 6-32
×
5/16 in. (8 mm) nuts.
You will need the following tools when assembling a surcharge mount:
l a medium slotted screw driver and
l a 5/16 in. (8 mm) nut driver.
Pre-Installation Assembly
l Position the top of ultrasonic sensor to the base of the surcharge plate.
l Align the holes of the ultrasonic plate with the ultrasonic sensor.
l Insert a 6-32
×
1 in. (25 mm) round-head machine screw with a 6-32 washer
through the ultrasonic plate and sensor.
l Secure with a 6-32 washer and 5/16 in. (8 mm) nut.
l Secure the three remaining locations as described in the previous step.
Note: A quick release mechanism can be interfaced between the surcharge
bracket and ultrasonic sensor.