ADS Environmental Services Model 3600 530002 A2 - Manual (Page 56)

Ring, Sensor, and Special Installations 4-23
Ultrasonic Plate
Screws Attach Top Part
of Quick Release to
Ultrasonic Plate
Screws Attach Base Plate
of Quick Release
to Ultrasonic Plate
Top Part
of Quick Release
Base Plate
of Quick Release
01-12.pcx
Ultrasonic Plate
Installation
l Determine location where the ultrasonic sensor is to be installed.
(Refer to location report.)
l Locate the apex of the pipe.
l Position and firmly hold the ultrasonic plate at the center apex of pipe and spot
drill (mark) one of the four anchor holes.
0 1-14.pcx
Spot Drilling the Ultrasonic Depth Sensor Plate
l Remove the plate and drill the anchor bolt hole to a depth of 1.25 in. (30 mm).