Ring, sensor, and special installations 4-25 – ADS Environmental Services Model 3600 530002 A2 User Manual

Page 58

Text mode
Original mode

Ring, Sensor, and Special Installations

4-25

01-17.pcx

Leveling the Plate

To ensure that the plate remains level, hold the adjustment nuts firmly in place
with the aid of a 7/16 in. (11 mm) wrench. Firmly tighten the 7/16 in. (11 mm)
securing nuts against the bottom side of the plate.

Attach the ultrasonic sensor to the installed ultrasonic plate via the quick
disconnect mount. Verify the installed ultrasonic sensor is level.

01-02.pcx

Installing the Sensor on the Plate:

Engage the Slide Mount on the Upstream Side and Slide the Ultrasonic Sensor Back until It Hits the Stop.